0
732-374-3872

CHEVROLET CORVETTE 1987 Pistons, Oil Pumps & Block Parts

Department
Part Type
  • ...Show all (123)

Manufacturer Part Number
Name
Notes: OBSOLETE COMP 21.59MM - OIL 13.18MM - .927" PIN DIA - COMP DIST 1.560" - LENGTH 3.218" - FORGED - 12.1:1 COMP RATIO - PERF - STEP HEAD - 64CC HEAD - HEAD LESS THAN 64CC MAY REQ MODIFICATION - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - O/S 0.030"
Quantity Per Car: 1
Notes: OBSOLETE COMP 21.59MM - OIL 13.18MM - .927" PIN DIA - COMP DIST 1.560" - LENGTH 3.218" - FORGED - 12.1:1 COMP RATIO - PERF - STEP HEAD - 64CC HEAD - HEAD LESS THAN 64CC MAY REQ MODIFICATION - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - O/S 0.060"
Quantity Per Car: 1
Notes: OBSOLETE PISTON HEAD DESCRIPTION RECESSED HEAD - 1.540" COMP DIST - O/S 0.030" - PISTON SKIRT CLEARANCE 0.0015" - ALUM - MEASURE SKIRT CLEARANCE AT PIN CENTER LINE - REPLACE IN COMPLETE SET
Quantity Per Car: 1
Notes: OBSOLETE COMP 21.98MM - OIL 14.76MM - .927" PIN DIA - COMP DIST 1.265" - 11.6:1 - 55CC HEAD - 11.2:1 - 58CC HEAD - 10.4:1 - 64CC HEAD - 9.1:1 - 76CC HEAD - HYPER ALUM ALLOY - 6" LONG CONN - PERF - FLAT HEAD - 2 VALVE RELIEFS - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" - O/S 0.040"
Quantity Per Car: 1
Notes: OBSOLETE PISTON HEAD DESCRIPTION RECESSED HEAD w/TRENCH VALVE RELIEFS - 1.540" COMP DIST - O/S 0.020" - PISTON SKIRT CLEARANCE 0.0015" - 2 VALVES - MEASURE SKIRT CLEARANCE AT .900" UP FROM BOTTOM OF SKIRT
Quantity Per Car: 8
Notes: OBSOLETE O/S .030" - w/o RINGS - SKIRT NON-COATED - HD EMISSION
Quantity Per Car: 8
Notes: OBSOLETE COMP 21.59MM - OIL 13.18MM - .927" PIN DIA - COMP DIST 1.560" - LENGTH 3.218" - FORGED - 12.1:1 COMP RATIO - PERF - STEP HEAD - 64CC HEAD - HEAD LESS THAN 64CC MAY REQ MODIFICATION - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - CLAIMER - O/S 0.030"
Quantity Per Car: 1
Notes: OBSOLETE COMP 21.59MM - OIL 13.18MM - .927" PIN DIA - COMP DIST 1.560" - LENGTH 3.218" - FORGED - 12.1:1 COMP RATIO - PERF - STEP HEAD - 64CC HEAD - HEAD LESS THAN 64CC MAY REQ MODIFICATION - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - CLAIMER - O/S 0.040"
Quantity Per Car: 1
Notes: OBSOLETE COMP 21.59MM - OIL 13.18MM - .927" PIN DIA - COMP DIST 1.560" - LENGTH 3.218" - FORGED - 12.1:1 COMP RATIO - PERF - STEP HEAD - 64CC HEAD - HEAD LESS THAN 64CC MAY REQ MODIFICATION - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - CLAIMER - O/S 0.060"
Quantity Per Car: 1
Notes: SUPERSEDED COMP 21.98MM - OIL 14.76MM - .927" PIN DIA - COMP DIST 1.265" - 11.6:1 - 55CC HEAD - 11.2:1 - 58CC HEAD - 10.4:1 - 64CC HEAD - 9.1:1 - 76CC HEAD - HYPER ALUM ALLOY - 6" LONG CONN - PERF - FLAT HEAD - 2 VALVE RELIEFS - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - O/S 0.020"
Quantity Per Car: 1
Notes: SUPERSEDED COMP 21.98MM - OIL 14.76MM - .927" PIN DIA - COMP DIST 1.265" - 11.6:1 - 55CC HEAD - 11.2:1 - 58CC HEAD - 10.4:1 - 64CC HEAD - 9.1:1 - 76CC HEAD - HYPER ALUM ALLOY - 6" LONG CONN - PERF - FLAT HEAD - 2 VALVE RELIEFS - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - O/S 0.030"
Quantity Per Car: 1
Notes: SUPERSEDED COMP 21.98MM - OIL 14.76MM - .927" PIN DIA - COMP DIST 1.265" - 11.6:1 - 55CC HEAD - 11.2:1 - 58CC HEAD - 10.4:1 - 64CC HEAD - 9.1:1 - 76CC HEAD - HYPER ALUM ALLOY - 6" LONG CONN - PERF - FLAT HEAD - 2 VALVE RELIEFS - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - O/S 0.040"
Quantity Per Car: 1
Notes: SUPERSEDED COMP 21.98MM - OIL 14.76MM - .927" PIN DIA - COMP DIST 1.265" - 11.6:1 - 55CC HEAD - 11.2:1 - 58CC HEAD - 10.4:1 - 64CC HEAD - 9.1:1 - 76CC HEAD - HYPER ALUM ALLOY - 6" LONG CONN - PERF - FLAT HEAD - 2 VALVE RELIEFS - CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE IN FULL SET 4.000" FUEL INJ - O/S 0.060"
Quantity Per Car: 1
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE STD - w/o RINGS - COMPRESSION STD - SKIRT COATED - USE RING #40564CP
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE 0.020" - w/o RINGS - COMPRESSION STD - SKIRT COATED - USE RING #40564CP.020
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE 0.030" - w/o RINGS - COMPRESSION STD - SKIRT COATED - USE RING #40564CP.030
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE 0.040" - w/o RINGS - COMPRESSION STD - SKIRT COATED - USE RING #40564CP.040
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE 0.060" - w/o RINGS - COMPRESSION STD - SKIRT COATED - USE RING #40564CP.060
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE STD - w/o RINGS - COMPRESSION STD - SKIRT NON-COATED - USE RING #40564CP
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE 0.020" - w/o RINGS - COMPRESSION STD - SKIRT NON-COATED - USE RING #40564CP.020
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE 0.030" - w/o RINGS - COMPRESSION STD - SKIRT NON-COATED - USE RING #40564CP.030
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE 0.040" - w/o RINGS - COMPRESSION STD - SKIRT NON-COATED - USE RING #40564CP.040
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE 0.060" - w/o RINGS - COMPRESSION STD - SKIRT NON-COATED - USE RING #40564CP.060
Quantity Per Car: 8
Notes: SIZE STD - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED - USE RING #40564CP
Quantity Per Car: 8
Notes: SIZE 0.020" - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED - USE RING #40564CP.020
Quantity Per Car: 8
Notes: SIZE 0.030" - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED - USE RING #40564CP.030
Quantity Per Car: 8
Notes: SIZE 0.040" - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED - USE RING #40564CP.040
Quantity Per Car: 8
Notes: SIZE 0.060" - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED - USE RING #40564CP.060
Quantity Per Car: 8
Notes: SIZE STD - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED - USE RING #40564CP
Quantity Per Car: 8
Notes: SIZE 0.020" - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED - USE RING #40564CP.020
Quantity Per Car: 8
Notes: SIZE 0.030" - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED - USE RING #40564CP.030
Quantity Per Car: 8
Notes: SIZE 0.040" - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED - USE RING #40564CP.040
Quantity Per Car: 8
Notes: SIZE 0.060" - w/o RINGS - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED - USE RING #40564CP.060
Quantity Per Car: 8
Notes: COMPRESSION 1.548" - PISTON QUALIFIER UCR - 5/64", LCR - 5/64", OCR - 3/16" - SIZE STD - w/o RINGS - PISTON TOP RECESSED w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: COMPRESSION 1.548" - PISTON QUALIFIER UCR - 5/64", LCR - 5/64", OCR - 3/16" - SIZE .030 - w/o RINGS - PISTON TOP RECESSED w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: COMPRESSION 1.548" - PISTON QUALIFIER UCR - 5/64", LCR - 5/64", OCR - 3/16" - SIZE .040 - w/o RINGS - PISTON TOP RECESSED w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: COMPRESSION 1.548" - PISTON QUALIFIER UCR - 5/64", LCR - 5/64", OCR - 3/16" - SIZE .060 - w/o RINGS - PISTON TOP RECESSED w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: OBSOLETE PERF COMP RATIO 64CC HEAD HEAD LESS THAN 64CC MAY REQ MODIFICATION CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE COMPLETE SET STEP HEAD FORGED .927" PIN DIA - 1.560" COMP DIST - 12.5:1 COMP RATIO - 2-1/16" COMP - 1-1/8" OIL RING GROOVE
Quantity Per Car: 1
Notes: OBSOLETE PERF COMP RATIO 64CC HEAD HEAD LESS THAN 64CC MAY REQ MODIFICATION CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE COMPLETE SET STEP HEAD FORGED .927" PIN DIA - 1.560" COMP DIST - 11.1:1 COMP RATIO - 2-5/64" COMP - 1-3/16" OIL RING GROOVE
Quantity Per Car: 1
Notes: OBSOLETE PERF AFTERMARKET TURBO CHECK FOR VALVES & CYL HEAD INTERFERENCE RECESSED HEAD 1 TRENCH TYPE VALVE RELIEF REPLACE COMPLETE SET FORGED .927" PIN DIA - 1.562" COMP DIST - 2-5/64" COMP - 1-3/16" OIL RING GROOVE - 2.770" LENGTH
Quantity Per Car: 1
Notes: OBSOLETE PERF HI PERF FLAT HEAD 1 TRENCH VALVE RELIEFS CHECK FOR VALVES & CYL HEAD INTERFERENCE REPLACE COMPLETE SET FORGED .927" PIN DIA - 1.560" COMP DIST - 10.25:1 - 64CC HEAD - 2-5/64" COMP - 1-3/16" OIL RING GROOVE - 3.095" LENGTH 9.6:1 - 7
Quantity Per Car: 1
Notes: OBSOLETE ALUM CYL HEAD - RECESSED HEAD - 4 VALVE RELIEFS IN RECESS REPLACE COMPLETE SET CAST ALUM 8 ENG CODE
Quantity Per Car: 1
Notes: OBSOLETE PERF STROKER, 3.750" STROKE CRANK FLAT HEAD - 4 VALVE RELIEFS REPLACE COMPLETE SET HYPEREUTECTIC ALUM ALLOY .927" PIN DIA - 1.425" COMP DIST - 2-5/64" COMP - 1-3/16" OIL RING GROOVE - 2.780" LENGTH - O/S 0.030"
Quantity Per Car: 1
Notes: OBSOLETE PERF CLAIMER FLAT HEAD - 2 SIAMESE VALVE RELIEFS HYPEREUTECTIC ALUM ALLOY .927" PIN DIA - 1.565" COMP DIST - 10.2:1 - 64CC HEAD - 10.5:1 - 62CC HEAD - 10.9:1 - 58CC HEAD - 2-5/64" COMP - 1-3/16" OIL RING GROOVE - 2.716" LENGTH 9.1:1 - 76CC HEAD
Quantity Per Car: 8
Notes: SUPERSEDED PERF RECESSED HEAD - 4 VALVE RELIEFS IN RECESS REPLACE COMPLETE SET HYPEREUTECTIC ALUM ALLOY .927" PIN DIA - 1.540" COMP DIST - 2-5/64" COMP - 1-3/16" OIL RING GROOVE - 3.200" LENGTH
Quantity Per Car: 1
Notes: OBSOLETE PERF CLAIMER 5.700" LONG ROD - 3.480" STROKE CRANK - DOME HEAD - 2 VALVE RELIEFS CHECK FOR VALVES & CYL HEAD INTERFERENCE HYPEREUTECTIC ALUM ALLOY .927" PIN DIA - 1.565" COMP DIST - 11.3:1 - 76CC HEAD - 13.5:1 - 64CC HEAD - 14.9:1 - 58CC HEAD
Quantity Per Car: 8
Notes: OBSOLETE PERF CLAIMER 6" LONG OLDS ROD FLAT HEAD - 2 VALVE RELIEFS CHECK FOR VALVES & CYL HEAD INTERFERENCE HYPEREUTECTIC ALUM ALLOY .927" PIN DIA - 1.265" COMP DIST - 2-5/64" COMP - 1-3/16" OIL RING GROOVE - 9.1:1 - 76CC HEAD - 10.2:1 - 64CC HEAD
Quantity Per Car: 8
Notes: OBSOLETE PERF CLAIMER 400 CRANK 5.700" LENGTH ROD FLAT HEAD - 2 VALVE RELIEFS CHECK FOR VALVES & CYL HEAD INTERFERENCE HYPEREUTECTIC ALUM ALLOY .927" PIN DIA - 1.430" COMP DIST - 2-5/64" COMP - 1-3/16" OIL RING GROOVE
Quantity Per Car: 8
Notes: OBSOLETE PERF CLAIMER 6" LONG CONN ROD - 400 CRANK FLAT HEAD - 2 VALVE RELIEFS CHECK FOR VALVES & CYL HEAD INTERFERENCE HYPEREUTECTIC ALUM ALLOY .927" PIN DIA - 1.130" COMP DIST - 2-1/16" COMP - 1-3/16" OIL RING GROOVE
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE STD - COMPRESSION STD - SKIRT COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE 0.020" - COMPRESSION STD - SKIRT COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE 0.030" - COMPRESSION STD - SKIRT COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE 0.040" - COMPRESSION STD - SKIRT COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - SIZE 0.060" - COMPRESSION STD - SKIRT COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE STD - COMPRESSION STD - SKIRT NON-COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE 0.020" - COMPRESSION STD - SKIRT NON-COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE 0.030" - COMPRESSION STD - SKIRT NON-COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE 0.040" - COMPRESSION STD - SKIRT NON-COATED
Quantity Per Car: 8
Notes: PISTON TOP RECESSED HEAD w/4 VALVE RELIEFS - PISTON QUALIFIER RECESS DIA. 2.767" - SIZE 0.060" - COMPRESSION STD - SKIRT NON-COATED
Quantity Per Car: 8
Notes: SIZE STD - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: SIZE 0.020" - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: SIZE 0.030" - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: SIZE 0.040" - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: SIZE 0.060" - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT COATED
Quantity Per Car: 8
Notes: SIZE STD - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED
Quantity Per Car: 8
Notes: SIZE 0.020" - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED
Quantity Per Car: 8
Notes: SIZE 0.030" - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED
Quantity Per Car: 8
Notes: SIZE 0.040" - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED
Quantity Per Car: 8
Notes: SIZE 0.060" - COMPRESSION STD - PISTON TOP: FLAT w/4 VALVE RELIEFS - SKIRT NON-COATED
Quantity Per Car: 8
Notes: OBSOLETE O/S 0.0015"
Quantity Per Car: 1
Notes: OBSOLETE O/S 0.003"
Quantity Per Car: 1
Notes: DISCONTINUED UNIVERSAL 1/8" WALL - 10-1/4" LENGTH
Quantity Per Car: 1
Notes: DISCONTINUED UNIVERSAL 3/32" WALL - 10-1/4" LENGTH
Quantity Per Car: 1
Notes: OBSOLETE CUT TO LENGTH 3/32" WALL - 5-1/2"
Quantity Per Car: 1
Notes: OBSOLETE CUT TO LENGTH 1/8" WALL - 5-1/2"
Quantity Per Car: 1
Notes: HARDENED FOR STEEL CAMSHAFT - HARDENED GEAR FOR STEEL CAM SHAFT
Quantity Per Car: 1
Notes: SENDER - 1 BLADE TERMINAL, 1/4-18 THD - VPI 1-877-846-8243
Quantity Per Car: 1
Notes: SET - DISH TOP .080" DEEP - 1.540" CH - USE R40058 OR M40058 RINGS - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: SET - DISH TOP .120" DEEP - 1.540" CH - FOR USE w/305 CYL HEADS - USE R40045 OR M40058 RINGS - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: SET - FLAT TOP - 1.540" CH - USE R40058 OR M40058 RINGS - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: SET - FLAT TOP - 1.560" CH - HYPER - USE R40058 OR M40058 RINGS - WHEN DEPLETED USE P5016(8) - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: SET - FLAT TOP - 1.560" CH - HYPER - COATED SKIRT - USE R40058 OR M40058 RINGS - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: SET - DISH TOP .042" DEEP - 1.540" CH - HYPER - COATED SKIRT - USE R40058 OR M40058 RINGS - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: TPI-SFI FUEL SYS - 16 VALVES - CHECK FOR PROPER WEIGHT & PHYSICAL MATCH BEFORE INSTALLATION
Quantity Per Car: 8
Notes: AT CRANKSHAFT - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: LATE ENGS w/1 PC - REAR MAIN SEAL - FORGING #14088526, 14088535, 14088995 - CHECK FOR PROPER PHYSICAL MATCH BEFORE INSTALLATION - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: TPI-SFI FUEL SYS - 16 VALVES - w/5/8" INLET HOLE - NOT RECOMMENDED FOR HIGH PERF OR OFFROAD APPLICATIONS
Quantity Per Car: 1
Notes: w/5/8" INLET HOLE USE IS55E SHAFT - FOR PERF & OFF ROAD - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: w/5/8" INLET HOLE - FOR PERF & OFF ROAD - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: HD STEEL SHAFT & SLEEVE - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: 5/8" TUBE - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: STEEL PLUGS - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: BRASS PLUGS - TPI-SFI FUEL SYS - 16 VALVES
Quantity Per Car: 1
Notes: ADVANCE BUSHING SET, w/FACTORY PLASTIC BUSHINGS
Quantity Per Car: 1
Notes: 3/32" WALL THICKNESS - STOCK - CUT TO LENGTH CYLINDER SLEEVE
Quantity Per Car: 8
Notes: STOCK - 3/32 INCH WALL THICKNESS - CUT TO LENGTH CYLINDER SLEEVE
Quantity Per Car: 8
Notes: STOCK - 1/16 INCH WALL THICKNESS - CUT TO LENGTH CYLINDER SLEEVE
Quantity Per Car: 8
Notes: 1/8" WALL THICKNESS - STOCK - CUT TO LENGTH CYLINDER SLEEVE
Quantity Per Car: 8
Notes: STOCK - 1/8 INCH WALL THICKNESS - CUT TO LENGTH CYLINDER SLEEVE
Quantity Per Car: 8
Notes: w/STANDARD PLUG KIT - BRASS - STOCK
Quantity Per Car: 1
Notes: w/STANDARD PLUG KIT - STEEL - STOCK
Quantity Per Car: 1
Notes: 1.643" OUSTIDE DIAMETER - CYLINDER BLOCK PLUGS ARE .008" OVERSIZE OUTSIDE DIAMETER - STEEL - STOCK
Quantity Per Car: 1
Notes: RELIEF PRESSURE 49LB - USE w/M-55, M-55HV, M155, M155HV, 10550, 10551, 10553, 10554 OIL PUMPS - OIL PRESSURE RELIEF VALVE SPRING - PERFORMANCE
Quantity Per Car: 1
Notes: RELIEF PRESSURE 58LB - USE w/M-55, M-55HV, M155, M155HV, 10550, 10551, 10553, 10554 OIL PUMPS - OIL PRESSURE RELIEF VALVE SPRING - PERFORMANCE
Quantity Per Car: 1
Notes: RELIEF PRESSURE 70LB - USE w/M-55, M-55HV, M155, M155HV, 10550, 10551, 10553, 10554 OIL PUMPS - OIL PRESSURE RELIEF VALVE SPRING - PERFORMANCE
Quantity Per Car: 1
Notes: RELIEF PRESSURE 78LB - USE w/M-55, M-55HV, M155, M155HV, 10550, 10551, 10553, 10554 OIL PUMPS - OIL PRESSURE RELIEF VALVE SPRING - PERFORMANCE
Quantity Per Car: 1
Notes: RELIEF PRESSURE 50-60LB - USE w/10552, 10552C, 10555, 10555C OIL PUMPS - OIL PRESSURE RELIEF VALVE SPRING - PERFORMANCE
Quantity Per Car: 1
Notes: RELIEF PRESSURE 70LB - USE w/10552, 10552C, 10555, 10555C OIL PUMPS - OIL PRESSURE RELIEF VALVE SPRING - PERFORMANCE
Quantity Per Car: 1
Notes: STD VOL & PRESSURE - 5/8" SCREEN INLET - SMALL BLOCK STYLE OIL PUMP - STOCK
Quantity Per Car: 1
Notes: 5/8" SCREEN INLET - SMALL BLOCK STYLE OIL PUMP - STOCK
Quantity Per Car: 1
Notes: STANDARD VOLUME OIL PUMP ONLY - STOCK - USE TO REPAIR M-55, M-55A, M155 OIL PUMPS
Quantity Per Car: 1
Notes: STOCK - USE w/IS-55G INTERMEDIATE SHAFT
Quantity Per Car: 1
Notes: INTERMEDIATE - MANUFACTURED w/A STEEL SHAFT GUIDE - STOCK - ELIMINATES THE NEED TO USE A NYLON SHAFT GUIDE
Quantity Per Car: 1
Notes: INTERMEDIATE - OE REPLACEMENT SHAFT - STOCK - USE w/M-55005 NYLON SHAFT GUIDE, SOLD SEPARATELY
Quantity Per Car: 1
Notes: STOCK - INSTALLATION KIT USED TO MOUNT BOLT ON SCREEN
Quantity Per Car: 1
Notes: w/SCREEN - STOCK
Quantity Per Car: 1
Notes: SUPERSEDED 16 VALVES - PERF - STD VOL MULTIPLE PRESS SETTINGS ALUM BILLET HD SHAFT SUPPORT AND PROTECTIVE COATINGS SCREW IN VALVE OFFSET SCREEN FOR 7" PAN INTEGRATED INTO PUMP BODY INCL OPTIONAL RELIEF SPRING, STUD MOUNTING KIT AND CHROME-MOLY I/S SHAFT CIRCLE TRACK RACING - MELLING PATENT 5, 810, 571
Quantity Per Car: 1
Notes: SUPERSEDED 16 VALVES - PERF - STD VOL MULTIPLE PRESS SETTINGS ALUM BILLET HD SHAFT SUPPORT AND PROTECTIVE COATINGS SCREW IN VALVE SCREEN FOR 8.25" PAN INTEGRATED INTO PUMP BODY INCL OPTIONAL RELIEF SPRING, STUD MOUNTING KIT AND CHROME-MOLY I/S SHAFT STREET AND STRIP - MELLING PATENT 5, 810, 571
Quantity Per Car: 1
Notes: SUPERSEDED 16 VALVES - PERF - STD VOL MULTIPLE PRESS SETTINGS ALUM BILLET HD SHAFT SUPPORT AND PROTECTIVE COATINGS SCREW IN VALVE SCREEN FOR 7.5" PAN INTEGRATED INTO PUMP BODY INCL OPTIONAL RELIEF SPRING, STUD MOUNTING KIT AND CHROME-MOLY I/S SHAFT STREET AND STRIP - MELLING PATENT 5, 810, 571
Quantity Per Car: 1
Notes: MULTIPLE PRESSURE SETTINGS RELIEF VALVE - STD VOLUME HI PERF OIL PUMP - INTEGRATED OIL PICKUP SCREEN IS DESIGNED FOR 7" OIL PANS - OIL PAN DEPTH 7" - INCLUDES 12550 CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES ADDITIONAL REPLACEMENT PRESSURE SPRINGS TO INCREASE 10LB OR DECREASE 10LB - INCLUDES OIL PUMP MOUNTING STUD KIT - PATENTED HIGH VOLUME BILLET STEEL SHARK TOOTH HELICAL GEARS - LIGHTWEIGHT BILLET 6061-T6 ALUMINUM HOUSING AND COVER - PERFORMANCE - DESIGNED FOR CIRCLE TRACK RACING APPLICATIONS
Quantity Per Car: 1
Notes: MULTIPLE PRESSURE SETTINGS RELIEF VALVE - STD VOLUME HI PERF OIL PUMP - INTEGRATED OIL PICKUP SCREEN IS DESIGNED FOR 8 - 1/4" OIL PANS - OIL PAN DEPTH 8.25" - INCLUDES 12550 CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES ADDITIONAL REPLACEMENT PRESSURE SPRINGS TO INCREASE 10LB OR DECREASE 10LB - INCLUDES OIL PUMP MOUNTING STUD KIT - PATENTED HIGH VOLUME BILLET STEEL SHARK TOOTH HELICAL GEARS - LIGHTWEIGHT BILLET 6061-T6 ALUMINUM HOUSING AND COVER - PERFORMANCE - DESIGNED FOR STREET AND STRIP APPLICATIONS
Quantity Per Car: 1
Notes: STD VOLUME HI PRESSURE HI PERF OIL PUMP - USES 5/8" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - NOT INSTALLED
Quantity Per Car: 1
Notes: STD VOLUME HI PRESSURE HI PERF OIL PUMP - USES 5/8" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - PATENTED BILLET STEEL SHARK TOOTH HELICAL GEARS - PERFORMANCE - NOT INSTALLED
Quantity Per Car: 1
Notes: STD VOLUME HI PRESSURE HI PERF OIL PUMP - USES 3/4" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - NOT INSTALLED
Quantity Per Car: 1
Notes: STD VOLUME HI PRESSURE HI PERF OIL PUMP - USES 3/4" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - PATENTED BILLET STEEL SHARK TOOTH HELICAL GEARS - PERFORMANCE - NOT INSTALLED
Quantity Per Car: 1
Notes: SUPERSEDED 16 VALVES - PERF - HI VOL 25%. MULTIPLE PRESS SETTINGS ALUM BILLET HD SHAFT SUPPORT AND PROTECTIVE COATINGS SCREW IN VALVE OFFSET SCREEN FOR 7" PAN INTEGRATED INTO PUMP BODY INCL OPTIONAL RELIEF SPRING, STUD MOUNTING KIT AND CHROME-MOLY I/S SHAFT CIRCLE TRACK RACING CHECK FOR PAN AND CRANKSHAFT CLEARANCE - MELLING PATENT 5, 810, 571
Quantity Per Car: 1
Notes: SUPERSEDED 16 VALVES - PERF - HI VOL 25%. MULTIPLE PRESS SETTINGS ALUM BILLET HD SHAFT SUPPORT AND PROTECTIVE COATINGS SCREW IN VALVE SCREEN FOR 7.5" PAN INTEGRATED INTO PUMP BODY INCL OPTIONAL RELIEF SPRING, STUD MOUNTING KIT AND CHROME-MOLY I/S SHAFT STREET AND STRIP CHECK FOR PAN AND CRANKSHAFT CLEARANCE - MELLING PATENT 5, 810, 571
Quantity Per Car: 1
Notes: SUPERSEDED 16 VALVES - PERF - HI VOL 25%. MULTIPLE PRESS SETTINGS ALUM BILLET HD SHAFT SUPPORT AND PROTECTIVE COATINGS SCREW IN VALVE SCREEN FOR 8.25" PAN INTEGRATED INTO PUMP BODY INCL OPTIONAL RELIEF SPRING, STUD MOUNTING KIT AND CHROME-MOLY I/S SHAFT STREET AND STRIP CHECK FOR PAN AND CRANKSHAFT CLEARANCE - MELLING PATENT 5, 810, 571
Quantity Per Car: 1
Notes: MULTIPLE PRESSURE SETTINGS RELIEF VALVE - INTEGRATED OIL PICKUP SCREEN IS DESIGNED FOR 7" OIL PANS - OIL PAN DEPTH 7" - INCLUDES 12550 CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES ADDITIONAL REPLACEMENT PRESSURE SPRINGS TO INCREASE 10LB OR DECREASE 10LB - INCLUDES OIL PUMP MOUNTING STUD KIT - PATENTED HIGH VOLUME BILLET STEEL SHARK TOOTH HELICAL GEARS - LIGHTWEIGHT BILLET 6061-T6 ALUMINUM HOUSING AND COVER - PERFORMANCE - DESIGNED FOR CIRCLE TRACK RACING APPLICATIONS - 25% HIGHER VOLUME HI PERF OIL PUMP
Quantity Per Car: 1
Notes: MULTIPLE PRESSURE SETTINGS RELIEF VALVE - INTEGRATED OIL PICKUP SCREEN IS DESIGNED FOR 7 - 1/2" OIL PANS - OIL PAN DEPTH 7.50" - INCLUDES 12550 CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES ADDITIONAL REPLACEMENT PRESSURE SPRINGS TO INCREASE 10LB OR DECREASE 10LB - INCLUDES OIL PUMP MOUNTING STUD KIT - PATENTED HIGH VOLUME BILLET STEEL SHARK TOOTH HELICAL GEARS - LIGHTWEIGHT BILLET 6061-T6 ALUMINUM HOUSING AND COVER - PERFORMANCE - DESIGNED FOR STREET AND STRIP APPLICATIONS - 25% HIGHER VOLUME HI PERF OIL PUMP
Quantity Per Car: 1
Notes: MULTIPLE PRESSURE SETTINGS RELIEF VALVE - INTEGRATED OIL PICKUP SCREEN IS DESIGNED FOR 8 - 1/4" OIL PANS - OIL PAN DEPTH 8.25" - INCLUDES 12550 CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES ADDITIONAL REPLACEMENT PRESSURE SPRINGS TO INCREASE 10LB OR DECREASE 10LB - INCLUDES OIL PUMP MOUNTING STUD KIT - PATENTED HIGH VOLUME BILLET STEEL SHARK TOOTH HELICAL GEARS - LIGHTWEIGHT BILLET 6061-T6 ALUMINUM HOUSING AND COVER - PERFORMANCE - DESIGNED FOR STREET AND STRIP APPLICATIONS - 25% HIGHER VOLUME HI PERF OIL PUMP
Quantity Per Car: 1
Notes: MULTIPLE PRESSURE SETTINGS RELIEF VALVE - STD VOLUME HI PERF OIL PUMP - INTEGRATED OIL PICKUP SCREEN IS DESIGNED FOR 7 - 1/2" OIL PANS - OIL PAN DEPTH 7.50" - INCLUDES 12550 CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES ADDITIONAL REPLACEMENT PRESSURE SPRINGS TO INCREASE 10LB OR DECREASE 10LB - INCLUDES OIL PUMP MOUNTING STUD KIT - PATENTED HIGH VOLUME BILLET STEEL SHARK TOOTH HELICAL GEARS - LIGHTWEIGHT BILLET 6061-T6 ALUMINUM HOUSING AND COVER - PERFORMANCE - DESIGNED FOR STREET AND STRIP APPLICATIONS
Quantity Per Car: 1
Notes: USES 5/8" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: USES 5/8" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - PATENTED BILLET STEEL SHARK TOOTH HELICAL GEARS - PERFORMANCE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: USES 3/4" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: USES 3/4" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - PATENTED BILLET STEEL SHARK TOOTH HELICAL GEARS - PERFORMANCE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: ADJUSTABLE PRESSURE RELIEF VALVE - USES 3/4" DIA PRESS-FIT SCREEN OR BOLT ON SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - INCLUDES MOUNTING BOLTS AND WRENCH - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - 10% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: ADJUSTABLE PRESSURE RELIEF VALVE - USES 3/4" DIA PRESS-FIT SCREEN OR BOLT ON SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - INCLUDES MOUNTING BOLTS AND WRENCH - MANUFACTURED w/ANTI-CAVITATION GROOVES - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - 10% HIGHER VOLUME HI PERF ANTI-CAVITATION OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: ADJUSTABLE PRESSURE RELIEF VALVE - USES 3/4" DIA PRESS-FIT SCREEN OR BOLT ON SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - INCLUDES MOUNTING BOLTS AND WRENCH - PATENTED BILLET STEEL SHARK TOOTH HELICAL GEARS - PERFORMANCE - 10% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: ADJUSTABLE PRESSURE RELIEF VALVE - USES 3/4" DIA PRESS-FIT SCREEN OR BOLT ON SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - INCLUDES OIL PUMP SCREEN MOUNTING GASKET - INCLUDES SELF LOCKING MOUNTING BOLTS AND WRENCH - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: ADJUSTABLE PRESSURE RELIEF VALVE - USES 3/4" DIA PRESS-FIT SCREEN OR BOLT ON SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - INCLUDES SELF LOCKING MOUNTING BOLTS AND WRENCH - MANUFACTURED w/ANTI-CAVITATION GROOVES - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - FOR RACING APPLICATIONS ONLY - USING THIS PUMP WILL REDUCE OIL PRESSURE AT IDLE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: ADJUSTABLE PRESSURE RELIEF VALVE - USES 3/4" DIA PRESS-FIT SCREEN OR BOLT ON SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES LOWER PRESSURE SPRING - INCLUDES OIL PUMP SCREEN MOUNTING GASKET - INCLUDES SELF LOCKING MOUNTING BOLTS AND WRENCH - PATENTED BILLET STEEL SHARK TOOTH HELICAL GEARS - PERFORMANCE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: ADJUSTABLE PRESSURE RELIEF VALVE - USES 3/4" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES ORIGINAL STOCK REPLACEMENT PRESSURE SPRING - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: ADJUSTABLE PRESSURE RELIEF VALVE - USES 3/4" DIA PRESS-FIT SCREEN - INCLUDES CHROME MOLY STEEL INTERMEDIATE DRIVE SHAFT w/STEEL GUIDE - INCLUDES ORIGINAL STOCK REPLACEMENT PRESSURE SPRING - MANUFACTURED w/ANTI-CAVITATION GROOVES - STANDARD BILLET STEEL SPUR GEARS - PERFORMANCE - FOR RACING APPLICATIONS ONLY - USING THIS PUMP WILL REDUCE OIL PRESSURE AT IDLE - 25% HIGHER VOLUME HI PERF OIL PUMP - NOT INSTALLED
Quantity Per Car: 1
Notes: INTERMEDIATE - HIGH STRENGTH CHROME MOLLY STEEL - PERFORMANCE - IMPROVED SHAFT RETAINER LOCKS ONTO THE OIL PUMP DRIVE SHAFT
Quantity Per Car: 1
Notes: BOLT ON SCREEN - SCREEN HAS 3/16" TO 1/4" UP OR DOWN ADJUSTMENT - w/SCREEN - USE w/10555 OIL PUMP - USE w/7" DEEP STOCK TYPE OIL PAN - PERFORMANCE
Quantity Per Car: 1
Notes: BOLT ON SCREEN - SCREEN HAS 3/16" TO 1/4" UP OR DOWN ADJUSTMENT - w/SCREEN - USE w/7.5" DEEP STOCK TYPE OIL PAN - PERFORMANCE
Quantity Per Car: 1
Notes: BOLT ON SCREEN - SCREEN HAS 3/16" TO 1/4" UP OR DOWN ADJUSTMENT - w/SCREEN - USE w/8" DEEP STOCK TYPE OIL PAN - PERFORMANCE
Quantity Per Car: 1
Notes: BOLT ON SCREEN - MESH IS TO THE RIGHT - SCREEN HAS 3/16" TO 1/4" UP OR DOWN ADJUSTMENT - w/SCREEN - USE w/7" DEEP OVAL TRACK OIL PAN - PERFORMANCE
Quantity Per Car: 1
Notes: BOLT ON SCREEN - MESH IS TO THE RIGHT - SCREEN HAS 3/16" TO 1/4" UP OR DOWN ADJUSTMENT - w/SCREEN - USE w/7.5" DEEP OVAL TRACK OIL PAN - PERFORMANCE
Quantity Per Car: 1
Notes: 5/8" SCREEN INLET - DOES NOT INCL OIL PUMP SCREEN - STD PRESSURE, HIGH VOLUME PUMP
Quantity Per Car: 1
Notes: 5/8" SCREEN INLET - DOES NOT INCL OIL PUMP SCREEN - STD PRESSURE, STD VOLUME PUMP
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes: INTERMEDIATE - STD - REQ NYLON SHAFT GUIDE
Quantity Per Car: 1
Notes: INTERMEDIATE - PERFORMER - HEAVY DUTY - STEEL SHAFT GUIDE MANUFACTURED ON SHAFT ELIMINATES NYLON SHAFT GUIDE - USE w/PART #601-1047, 601-8033
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes: 1.625" DIAMETER - BRASS - SINGLE
Quantity Per Car: 1
Notes: EXC R ENG CODE 2 SHORT KEYS
Quantity Per Car: 1
Notes: 3/8" - 24 X 1 59/64" KNURLED
Quantity Per Car: 16
Notes: 3/8" DIA - PREMIUM PERF
Quantity Per Car: 1
Notes: 3/8" DIA - STANDARD PERF
Quantity Per Car: 1
Notes: 11/32" - TORQUE 38-42 (170, 000 PSI TENSILE) - (16/CARD)
Quantity Per Car: 1
Notes: 3/8" - TORQUE 48-52 (170, 000 PSI TENSILE) - (16/CARD)
Quantity Per Car: 1
Notes: 11/32" - 24 - STANDARD
Quantity Per Car: 16
Notes: 11/32" - 24 - MARSDEN
Quantity Per Car: 16
Notes: 11/32" - 24 - SELF-LOCKING
Quantity Per Car: 16
Notes: 3/8" - 24 - HI-PERF - SELF-LOCKING
Quantity Per Car: 16
Notes: 3/8" - 24 - STANDARD
Quantity Per Car: 16
Notes: HI-PERF - 3/8" - 24 - 10/BOX
Quantity Per Car: 1
Notes: HI-PERF - 3/8" - 24 - (16 PCS SKIN PKG)
Quantity Per Car: 1
Notes: HI-PERF - 11/32" - 24 - SPECIAL SELF-LOCKING - (16/CARD)
Quantity Per Car: 1
Notes: HI-PERF - 3/8" - 24 - GRADE "8" SELF-LOCKING - (16/CARD)
Quantity Per Car: 1
Notes: HI-PERF - 4-BOLT - 2.45 JOURNAL - OE REPLACEMENT
Quantity Per Car: 1
Notes: HI-PERF - LARGE 2.45 - CONVERTS MAIN CAP FROM 2-BOLT TO 4-BOLT
Quantity Per Car: 1
Notes: HI-PERF - LARGE 2.45 - CONVERTS MAIN CAP FROM 2-BOLT TO 4-BOLT - (22 DEGREE ANGLE)
Quantity Per Car: 1
Notes: HI-PERF - BRONZE - (.500 DIA SHAFT)
Quantity Per Car: 1
Notes: HI-PERF - BRONZE - (.481 DIA SHAFT)
Quantity Per Car: 1
Notes: HI-PERF - ADDS 25% MORE VOLUME
Quantity Per Car: 1
Notes: HI-PERF - INCREASED PRESSURE & VOLUME - INCLUDES SCREEN (MAY REQUIRE OIL PAN MODIFICATION)
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes: PERFORMANCE & SPECIAL HI-PERF
Quantity Per Car: 1
Notes: OPTIONAL - 25% MORE VOLUME THAN OP-55 - USE SHAFT w/STEEL RETAINER
Quantity Per Car: 1
Notes: OPTIONAL - ADDS MORE VOLUME THAN OP-55-HV - INCLUDES - SCREEN - (MAY REQUIRE CUTTING PAN BAFFLES & MUST USE SHAFT w/STEEL RETAINER)
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes: NYLON
Quantity Per Car: 1
Notes: INTERMEDIATE - HI-PERF - STEEL SHAFT GUIDE
Quantity Per Car: 1
Notes: STEEL SHAFT GUIDE - INTERMEDIATE - EXC SERIES 50
Quantity Per Car: 1
Notes: INTERMEDIATE - NYLON SHAFT GUIDE
Quantity Per Car: 1
Notes: HI-PERF
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes: BOLT ON TYPE FOR PAN RAIL
Quantity Per Car: 1
Notes: BOLT-ON TYPE FOR WATER JACKETS - CONVERTS MODELS TO APPLICATIONS
Quantity Per Car: 1
Notes: WELD-ON TYPE - CONVERTS MODELS TO APPLICATIONS
Quantity Per Car: 1
Notes: OIL PUMP RESTRICTOR
Quantity Per Car: 1
Notes: OIL PUMP BOLT
Quantity Per Car: 1
Notes: 12MM OIL GALLERY PLUG
Quantity Per Car: 3
Notes: 37/64" - w/.020 OIL LINE HOLE
Quantity Per Car: 2
Notes: 1 5/8" BLOCK PLUG - DEEP CUP
Quantity Per Car: 8
Notes: OPTIONAL - .010" O/S - 1 5/8" SIDE BLOCK PLUG
Quantity Per Car: 1
Notes: OPTIONAL - BRASS - 1 5/8" BLOCK PLUG - DEEP CUP PLUG
Quantity Per Car: 1
Notes: OPTIONAL - STAINLESS STEEL - 1 5/8" BLOCK PLUG
Quantity Per Car: 1
Notes: 1/2" OIL GALLERY PLUG
Quantity Per Car: 3
Notes: OPTIONAL - BRASS - 1/2" BLOCK PLUG
Quantity Per Car: 1
Notes: 2 7/64" CAM PLUG
Quantity Per Car: 1
Notes: OPTIONAL - BRASS - 2 7/64" CAM PLUG
Quantity Per Car: 1
Notes: HI-PERF - BRASS
Quantity Per Car: 1
Notes: STEEL - CARDED
Quantity Per Car: 1
Notes: BRASS - CARDED
Quantity Per Car: 1
Notes: BRASS - POLY BAGGED
Quantity Per Car: 1
Notes: STEEL - POLY BAGGED
Quantity Per Car: 1
Notes: AT CYLINDER HEAD - KIT - HI-PERF. - HEAD TO BLOCK
Quantity Per Car: 1
Notes: AT CYLINDER HEAD - KIT - HI-PERF. - BELL HOUSING TO BLOCK - EXTRA LONG
Quantity Per Car: 1
Notes: AT CYLINDER HEAD - CAMSHAFT TO SPROCKET PIN - 1/4" X 5/8"
Quantity Per Car: 1
Notes: AT CYLINDER HEAD - HEAD TO BLOCK - 5/16" X 1/2"
Quantity Per Car: 4
Notes: AT CYLINDER HEAD - KIT - HEAD TO BLOCK - 5/16" X 1/2" - (4/CARD)
Quantity Per Car: 1
Notes: SET - w/FLAT TOP & 1.540" COMP HEIGHT - 2.0X2.0X4.8 - 2.0X2.0X4.8 MUST USE w/PR3103A OR PR3103AC - 16 VALVES
Quantity Per Car: 1
Notes: SET - w/.080" DEEP DISH - 2.0X2.0X4.8 - 2.0X2.0X4.8 MUST USE w/PR3103A OR PR3103AC - 16 VALVES
Quantity Per Car: 1
Notes: w/3/4 INLET - w/STANDARD VOLUME - 16 VALVES
Quantity Per Car: 1
Notes: w/3/4 INLET - w/HIGH VOLUME - 16 VALVES
Quantity Per Car: 1
Notes: w/5/8 INLET - w/STANDARD VOLUME - 16 VALVES
Quantity Per Car: 1
Notes: w/5/8 INLET - w/HIGH VOLUME - 16 VALVES
Quantity Per Car: 1
Notes: SHAFT ASSEMBLY - STEEL GUIDE - 16 VALVES
Quantity Per Car: 1
Notes: BRASS - 16 VALVES
Quantity Per Car: 1
Notes: OBSOLETE STEEL SHALLOW CUP FREEZE PLUG - 53.569MM DIAMETER - 2.109" DIA
Quantity Per Car: 1
Notes: OBSOLETE STEEL DEEP CUP FREEZE PLUG - 41.275MM DIAMETER - 1.625" DIA
Quantity Per Car: 1
Notes: STEEL DEEP CUP FREEZE PLUG - 12.700MM DIAMETER - 0.500" DIA
Quantity Per Car: 1
Notes: OBSOLETE STEEL DEEP CUP FREEZE PLUG - 0.472" DIAMETER - 12.000MM DIAMETER - EXPORT
Quantity Per Car: 1
Notes: BRASS DEEP CUP FREEZE PLUG - 41.275MM DIAMETER - 1.625" DIA - VINTAGE - EXPORT
Quantity Per Car: 1
Notes: STEEL EXPANSION PLUG KIT
Quantity Per Car: 1
Notes: BRASS EXPANSION PLUG KIT - EXPORT
Quantity Per Car: 1
Notes: OBSOLETE PIPE PLUG - 1/4" - STEEL - BLOCK DRAIN PLUG - HEX DRIVER
Quantity Per Car: 1
Notes: STD VOL & PRESSURE - 5/8" SCREEN INLET - SMALL BLOCK STYLE OIL PUMP
Quantity Per Car: 1
Notes: 5/8" SCREEN INLET - SMALL BLOCK STYLE OIL PUMP
Quantity Per Car: 1
Notes: INTERMEDIATE - USE w/224-6146 INTERMEDIATE SHAFT
Quantity Per Car: 1
Notes: INTERMEDIATE - OE REPLACEMENT SHAFT - USE w/224-43343 NYLON SHAFT GUIDE, SOLD SEPARATELY
Quantity Per Car: 1
Notes: INTERMEDIATE - MANUFACTURED w/A STEEL SHAFT GUIDE - ELIMINATES THE NEED TO USE A NYLON SHAFT GUIDE
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes: OBSOLETE 1 RING(S): 3/16 GROOVE - 2 RING(S): 5/64 GROOVE WHEN DEPLETED USE H345DCP - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - STANDARD SIZE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LR-63 LOCK RING FOR FLOATED APPL - .020" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LR-63 LOCK RING FOR FLOATED APPL - .030" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE 1 RING(S): 3/16 GROOVE - 2 RING(S): 5/64 GROOVE WHEN DEPLETED USE H345DCP 40 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .040" O/S FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LR-63 LOCK RING FOR FLOATED APPL - .060" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LR-63 LOCK RING FOR FLOATED APPL - .080" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - FLAT, 4 RELIEFS - STANDARD SIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - FLAT, 4 RELIEFS - .020" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - FLAT, 4 RELIEFS - .030" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - FLAT, 4 RELIEFS - .040" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - FLAT, 4 RELIEFS - .060" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - PERF OR REG DUTY OPERATION - FLAT HEAD w/4 VALVE RELIEFS - DUROSHIELD SKIRT COATED PISTON - USE w/E-251K RING SET - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .080" OVERSIZE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 2 RING(S), 5/64 GROOVE - 1 RING(S), 3/16 GROOVE - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - STANDARD SIZE - 1.548 CD .098" DEEP X 2.771 DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 2 RING(S), 5/64 GROOVE - 1 RING(S), 3/16 GROOVE - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .020" O/S - 1.548 CD .098" DEEP X 2.771 DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 2 RING(S), 5/64 GROOVE - 1 RING(S), 3/16 GROOVE - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .030" O/S - 1.548 CD .098" DEEP X 2.771 DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA
Quantity Per Car: 8
Notes: OBSOLETE 1 RING(S): 3/16 GROOVE - 2 RING(S): 5/64 GROOVE WHEN DEPLETED USE H423DCP 40 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .040" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA
Quantity Per Car: 8
Notes: OBSOLETE 1 RING(S): 3/16 GROOVE - 2 RING(S): 5/64 GROOVE WHEN DEPLETED USE H423DCP 60 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .060" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA
Quantity Per Car: 8
Notes: SUPERSEDED HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .080" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - STANDARD SIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .020" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .030" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .040" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .060" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - RECESSED HEAD .098" DEEP X 2.771" DIA. w/4 VALVE RELIEFS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .080" OVERSIZE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - 2 RING(S), 5/64 GROOVE - 1 RING(S), 3/16 GROOVE - 1.540 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - USE IN SETS ONLY - STANDARD SIZE .100" DEEP X 2.750 DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA
Quantity Per Car: 8
Notes: OBSOLETE 1 RING(S): 3/16 GROOVE - 2 RING(S): 5/64 GROOVE WHEN DEPLETED USE H423ACP 20 - HYPEREUTECTIC - .100 DISH, 4 RELIEFS - .9275" PIN DIA - 1.540 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - USE IN SETS ONLY - .020" O/S
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - 1.540 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - USE IN SETS ONLY - .030" O/S .100 DEEP X 2.750 DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - 1.540 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - USE IN SETS ONLY - .040" O/S .100 DEEP X 2.750 DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - 1.540 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - USE IN SETS ONLY - .060" O/S .100 DEEP X 2.750 DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - USE w/WE-251K RING SET - STANDARD SIZE 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - USE w/WE-251K RING SET - .020" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - USE w/WE-251K RING SET - .030" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - USE w/WE-251K RING SET - .040" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - USE w/WE-251K RING SET - .060" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - USE w/WE-251K RING SET - FLAT, 4 RELIEFS - STANDARD SIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - USE w/WE-251K RING SET - FLAT, 4 RELIEFS - .020" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - USE w/WE-251K RING SET - FLAT, 4 RELIEFS - .030" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - USE w/WE-251K RING SET - FLAT, 4 RELIEFS - .040" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - PERF OR REG DUTY OPERATION - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - USE w/WE-251K RING SET - FLAT, 4 RELIEFS - .060" OVERSIZE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - .9275" PIN DIA - 2 RING(S), 5/64 GROOVE - 1 RING(S), 3/16 GROOVE - 1.560 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE IN SETS ONLY - STANDARD SIZE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - .9275" PIN DIA - 2 RING(S), 5/64 GROOVE - 1 RING(S), 3/16 GROOVE - 1.560 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE IN SETS ONLY - .040" O/S FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - .9275" PIN DIA - 2 RING(S), 5/64 GROOVE - 1 RING(S), 3/16 GROOVE - 1.560 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE IN SETS ONLY - .060" O/S FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - .9275" PIN DIA - 1.560 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - CAST - USE IN SETS ONLY - .020" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - .9275" PIN DIA - 1.560 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - CAST - USE IN SETS ONLY - .030" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - .9275" PIN DIA - 1.560 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - CAST - USE IN SETS ONLY - .040" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - .9275" PIN DIA - 1.560 CD - NOT OE DUPLICATE WT - PERF OR REG DUTY OPERATION - CAST - USE IN SETS ONLY - .060" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - STANDARD SIZE .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .020" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .030" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .040" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .060" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - STANDARD SIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .020" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .030" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .040" OVERSIZE
Quantity Per Car: 8
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - INDIVIDUAL - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .098 DISH, 4 RELIEFS - 1.548 CD - CAST - DUROSHIELD SKIRT COATED PISTON - USE w/LOCK RING LR-63 - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .060" OVERSIZE
Quantity Per Car: 8
Notes: OBSOLETE 2 RING(S), 5/64 GROOVE - 1 RING(S), 3/16 GROOVE - 1.540 CD - .030" O/S .067" DEEP X 3.265 DIA - RECESSED HEAD - w/SHALLOW OIL RING GROOVE .9275" PIN DIA
Quantity Per Car: 8
Notes: OBSOLETE HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - w/PREMIUM RINGS - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .030" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 1
Notes: OBSOLETE HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - w/PREMIUM RINGS - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .040" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 1
Notes: OBSOLETE HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - .9275" PIN DIA - 1.548 CD - w/PREMIUM RINGS - PERF OR REG DUTY OPERATION - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .060" O/S 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE FLAT HEAD - w/4 VALVE RELIEFS
Quantity Per Car: 1
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - w/PREMIUM RINGS - PERF OR REG DUTY OPERATION - FLAT HEAD w/4 VALVE RELIEFS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .030" OVERSIZE
Quantity Per Car: 1
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - w/PREMIUM RINGS - PERF OR REG DUTY OPERATION - FLAT HEAD w/4 VALVE RELIEFS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .040" OVERSIZE
Quantity Per Car: 1
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - w/PREMIUM RINGS - PERF OR REG DUTY OPERATION - FLAT HEAD w/4 VALVE RELIEFS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .060" OVERSIZE
Quantity Per Car: 1
Notes: OBSOLETE HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - w/PREMIUM RINGS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .030" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 1
Notes: OBSOLETE HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - w/PREMIUM RINGS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .040" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 1
Notes: OBSOLETE HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - 1.548 CD - w/PREMIUM RINGS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPL - .060" O/S .098" DEEP X 2.771" DIA - RECESSED HEAD - w/4 VALVE RELIEFS .9275" PIN DIA - 1 RING(S), 3/16 GROOVE - 2 RING(S), 5/64 GROOVE
Quantity Per Car: 1
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - w/PREMIUM RINGS - RECESSED HEAD .098" DEEP X 2.771" DIA. w/4 VALVE RELIEFS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .030" OVERSIZE
Quantity Per Car: 1
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - w/PREMIUM RINGS - RECESSED HEAD .098" DEEP X 2.771" DIA. w/4 VALVE RELIEFS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .040" OVERSIZE
Quantity Per Car: 1
Notes: 2 GROOVE(S): 5/64 - 1 GROOVE(S): 3/16 - HYPEREUTECTIC - SET - w/MACHINED VALVE RELIEFS AND CIRCLIP GROOVES - w/PREMIUM RINGS - RECESSED HEAD .098" DEEP X 2.771" DIA. w/4 VALVE RELIEFS - DUROSHIELD SKIRT COATED PISTON - USE w/LR-63 LOCK RING FOR FLOATED APPLICATIONS - .060" OVERSIZE
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes: OPTIONAL STANDARD - AT CRANKSHAFT - FRONT
Quantity Per Car: 1
Notes: OPTIONAL PREMIUM - AT CRANKSHAFT - FRONT
Quantity Per Car: 1
Notes: OPTIONAL PREMIUM - AT CRANKSHAFT - REAR
Quantity Per Car: 1
Notes: DISTRIBUTOR TO OIL PUMP SHAFT RETAINER - INTERMEDIATE
Quantity Per Car: 1
Notes: AT CRANKSHAFT - REAR - USE w/INSTALLATION TOOL
Quantity Per Car: 1
Notes: AT MAIN BEARING - USE: CRANKSHAFT
Quantity Per Car: 1
Notes: DISTRIBUTOR TO OIL PUMP SHAFT RETAINER - INTERMEDIATE
Quantity Per Car: 1
Notes: AT CRANKSHAFT - REAR - 0.013IN THICKNESS - NICKEL PLATED FORMED STEEL
Quantity Per Car: 1
Notes:
Quantity Per Car: 1
Notes: 1.625" - STEEL - AS REQ - PKG QTY: 2 - PKG TYPE: CARD
Quantity Per Car: 1
Notes: 1.625" - STEEL - AS REQ - PKG QTY: 10 - BOXED - PKG TYPE: BOX
Quantity Per Car: 1
Notes: 1.625" - STEEL - AS REQ - PKG QTY: 1 - BAGGED
Quantity Per Car: 1
Notes: BRASS - PKG QTY: 10 - BOXED - PKG TYPE: BOX
Quantity Per Car: 1
Notes: 41.5MM - STEEL - AS REQ - PKG QTY: 10 - BOXED - PKG TYPE: BOX
Quantity Per Car: 1
Notes: 41.5MM - STEEL - AS REQ - PKG QTY: 1 - BAGGED
Quantity Per Car: 1
Notes: AT CRANKSHAFT - REAR - FAG GLOBAL #413 3568 100
Quantity Per Car: 1
Notes: AT CRANKSHAFT - REAR - FAG GLOBAL #413 3569 100
Quantity Per Car: 1
Notes:
Quantity Per Car: 1