0
732-374-3872

VOLKSWAGEN JETTA 1989 Suspension Parts

Department
Part Type
  • ...Show all (266)

Manufacturer Part Number
Name
Notes: SINGLE OFFSET ADJUSTER - FRONT - 12MM BOLTS - FROM MINUS 1-3/4 TO PLUS 1-3/4 DEGREES OF CHANGE
Quantity Per Car: 2
Notes: FRONT - 12MM BOLTS - DOUBLE OFFSET - FROM MINUS 1-3/4 TO PLUS 1-3/4 DEGREES OF CHANGE - REPLACING ALL BOLTS WILL INCREASE CAMBER ADJUSTMENT RANGE TO +/- 2.5 DEG
Quantity Per Car: 2
Notes: BUSHING - FRONT LOWER FORWARD
Quantity Per Car: 2
Notes: BUSHING - FRONT LOWER REARWARD
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: KIT - FRONT TO FRAME - 17 MM SWAY BAR DIA
Quantity Per Car: 1
Notes: BUSHING - REAR AT AXLE PIVOT
Quantity Per Car: 1
Notes: FULL CONTACT DUAL ANGLE SHIM - INTERNAL CUT TO FIT TABS - REAR - UP TO PLUS/MINUS 1-1/2 DEGREE CAMBER & PLUS/MINUS 1-1/2 DEGREE TOE - BLUE SHIM - CHECK CALIPER TO ROTOR CLEARANCE AFTER INSTALLATION - M10 X 1.5 X 40 MM HUB BOLTS SHOULD BE USED WHEN INSTALLING REAR WHEEL SHIM
Quantity Per Car: 2
Notes: CUT TO FIT - REAR - UP TO PLUS/MINUS 1/4 DEGREE CAMBER & PLUS/MINUS 1/4 DEGREE TOE - BLUE SHIM
Quantity Per Car: 2
Notes: CUT TO FIT - REAR - UP TO PLUS/MINUS 1/2 DEGREE CAMBER & PLUS/MINUS 1/2 DEGREE TOE - BLUE SHIM
Quantity Per Car: 2
Notes: CUT TO FIT - REAR - UP TO PLUS/MINUS 3/4 DEGREE CAMBER & PLUS/MINUS 3/4 DEGREE TOE - BLUE SHIM
Quantity Per Car: 2
Notes: CUT TO FIT - REAR - UP TO PLUS/MINUS 1 DEGREE CAMBER & PLUS/MINUS 1 DEGREE TOE - BLUE SHIM
Quantity Per Car: 2
Notes: CUT TO FIT - REAR - UP TO PLUS/MINUS 1-1/4 DEGREE CAMBER & PLUS/MINUS 1-1/4 DEGREE TOE - BLUE SHIM
Quantity Per Car: 2
Notes: CUT TO FIT - REAR - UP TO PLUS/MINUS 1-1/2 DEGREE CAMBER & PLUS/MINUS 1-1/2 DEGREE TOE - BLUE SHIM
Quantity Per Car: 2
Notes: EXTERNAL CUT TO FIT TABS - REAR - FROM 0 TO 1-1/2 DEGREES CAMBER/TOE - BLUE SHIM - FULL RANGE ADJUSTMENT
Quantity Per Car: 2
Notes: HALF SHIM - REAR - 5' 6" BOX - APPROXIMATE CAMBER CHANGE 1/4 DEGREE(S) - GOLD COLOR/.10 STAMPING
Quantity Per Car: 2
Notes: HALF SHIM - REAR - 3/32" APPROXIMATE TOE CHANGE - APPROXIMATE CAMBER CHANGE 3/8 DEGREE(S) - SILVER COLOR 0.15 STAMPING
Quantity Per Car: 1
Notes: HALF SHIM - REAR - 1/8" APPROXIMATE TOE CHANGE - APPROXIMATE CAMBER CHANGE 1/2 DEGREE(S) - BLACK COLOR/.20 STAMPING
Quantity Per Car: 2
Notes: HALF SHIM - REAR - 3/16" APPROXIMATE TOE CHANGE - APPROXIMATE CAMBER CHANGE 3/4 DEGREE(S) - GREY COLOR/.30 STAMPING
Quantity Per Car: 1
Notes: KIT - CAMBER PLUS 2 DEGREES OF CHANGE
Quantity Per Car: 2
Notes: FRONT - PREMIUM
Quantity Per Car: 2
Notes: BUSHING - FRONT LOWER FORWARD - PREMIUM
Quantity Per Car: 2
Notes: BUSHING - FRONT LOWER REARWARD - PREMIUM
Quantity Per Car: 2
Notes: FRONT - PREMIUM
Quantity Per Car: 2
Notes: KIT - FRONT - PREMIUM - 2 REQ
Quantity Per Car: 2
Notes: FRONT TO FRAME - 17MM BAR - PREMIUM
Quantity Per Car: 1
Notes: SUPERSEDED RIGHT LOWER - PREMIUM
Quantity Per Car: 1
Notes: SUPERSEDED LEFT LOWER - PREMIUM
Quantity Per Car: 1
Notes: C-TEK STANDARD - FRONT
Quantity Per Car: 2
Notes: C-TEK STANDARD - KIT - FRONT - 2 REQ
Quantity Per Car: 2
Notes: REPLACES 12MM STRUT MOUNTING BOLTS - FRONT - ADJUSTS CAMBER -2.00 DEG TO +2.00 DEG
Quantity Per Car: 1
Notes: BUSHING - FRONT LOWER FORWARD
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: KIT - FRONT
Quantity Per Car: 2
Notes: FRONT TO FRAME - 17.10MM DIA BAR
Quantity Per Car: 1
Notes: FRONT LEFT LOWER
Quantity Per Car: 1
Notes: FRONT RIGHT LOWER
Quantity Per Car: 1
Notes: FRONT LEFT LOWER - w/19MM BALL STUD
Quantity Per Car: 1
Notes: FRONT RIGHT LOWER - w/19MM BALL STUD
Quantity Per Car: 1
Notes: PROBLEM SOLVER - DESIGN ALLOWS EASE OF INSTALLATION - BUSHING - FRONT LOWER REARWARD
Quantity Per Car: 2
Notes: BUSHING - FRONT LOWER FORWARD
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: BUSHING - REAR AT AXLE PIVOT
Quantity Per Car: 1
Notes: CONTAINS ALIGNMENT PRODUCT FOR THIS AND VARIOUS APPLICATIONS
Quantity Per Car: 1
Notes: FRONT - 12MM BOLTS - MINUS 1-3/4 TO PLUS 1-3/4 DEGREE - SINGLE OFFSET
Quantity Per Car: 2
Notes: PROBLEM SOLVER - FRONT - 12MM BOLTS - DOUBLE OFFSET - MINUS 1-3/4 TO PLUS 1-3/4 DEGREE - REPLACING ALL BOLTS WILL INCREASE CAMBER ADJUSTMENT RANGE TO +/- 2.5 DEG - SLOTTED ONLY
Quantity Per Car: 2
Notes: FULL CONTACT DUAL ANGLE SHIM - INTERNAL CUT TO FIT TABS - REAR - +/- 1-1/2 DEGREE CAMBER/TOE - BLUE SHIM - CHECK CALIPER TO ROTOR CLEARANCE AFTER INSTALLATION - M10 X 1.5 X 40MM HUB BOLTS SHOULD BE USED WHEN INSTALLING REAR WHEEL SHIM
Quantity Per Car: 2
Notes: EXTERNAL CUT TO FIT TABS - FULL CONTACT DUAL ANGLE SHIM - REAR - UNIVERSAL TYPE - +/- 1-1/2 DEG - 0 TO 1-1/2 DEGREE CAMBER/TOE - BLUE SHIM - FULL RANGE ADJUSTMENT
Quantity Per Car: 2
Notes: FULL CONTACT DUAL ANGLE SHIM - CUT TO FIT - REAR - +/- 1/4 DEGREE CAMBER/TOE - BLUE SHIM
Quantity Per Car: 2
Notes: FULL CONTACT DUAL ANGLE SHIM - CUT TO FIT - REAR - +/- 1/2 DEGREE CAMBER/TOE - BLUE SHIM
Quantity Per Car: 2
Notes: FULL CONTACT DUAL ANGLE SHIM - CUT TO FIT - REAR - +/- 3/4 DEGREE CAMBER/TOE - BLUE SHIM
Quantity Per Car: 2
Notes: FULL CONTACT DUAL ANGLE SHIM - CUT TO FIT - REAR - +/- 1 DEGREE CAMBER/TOE - BLUE SHIM
Quantity Per Car: 2
Notes: FULL CONTACT DUAL ANGLE SHIM - CUT TO FIT - REAR - +/- 1-1/4 DEGREE CAMBER/TOE - BLUE SHIM
Quantity Per Car: 2
Notes: FULL CONTACT DUAL ANGLE SHIM - CUT TO FIT - REAR - +/- 1-1/2 DEG - +/- 1-1/2 DEGREE CAMBER/TOE - BLUE SHIM
Quantity Per Car: 2
Notes: MASTER ASSORTMENT OF FULL CONTACT DUAL ANGLE SHIMS - REAR - CONTAINS 60 SHIMS, TAB POSITIONING TEMPLATES, INSTRUCTIONS, INDEXING WALL CHART AND TAB CUTTING TOOL
Quantity Per Car: 1
Notes: UNIVERSAL ASSORTMENT OF FULL CONTACT DUAL ANGLE SHIMS - REAR - INCLUDES TEMPLATES, CUTTING TOOL, SLIDE CHARTS AND INSTRUCTIONS
Quantity Per Car: 1
Notes: FRONT LOWER STRUT MOUNT - PROBLEM SOLVER - KIT - CONTAINS 2 WEDGES, 2 BOLTS AND NUTS - PLUS 2 DEGREES CAMBER
Quantity Per Car: 1
Notes: FRONT - KIT
Quantity Per Car: 2
Notes: FRONT TO FRAME
Quantity Per Car: 1
Notes: FRONT - 12MM BOLTS - ADJUSTMENT RANGE: CAMBER +/-1.75 DEGREES
Quantity Per Car: 1
Notes: FRONT LOWER FORWARD - BUSHING - HORIZONTAL
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: KIT - FRONT
Quantity Per Car: 2
Notes: FRONT TO FRAME
Quantity Per Car: 1
Notes: FRONT LEFT LOWER - w/19MM BALL STUD
Quantity Per Car: 1
Notes: FRONT RIGHT LOWER - w/19MM BALL STUD
Quantity Per Car: 1
Notes: FULL CONTACT DUAL ANGLE SHIM - REAR - ADJUSTMENT RANGE: CAMBER/TOE +/-1.50 DEGREES
Quantity Per Car: 2
Notes: REAR - UNIVERSAL 1/2" SLOT SHIM - 8/PKG
Quantity Per Car: 1
Notes: FRONT
Quantity Per Car: 2
Notes: BUSHING - FRONT LOWER FORWARD
Quantity Per Car: 2
Notes: BUSHING - FRONT LOWER REARWARD
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: KIT - FRONT - 2 REQ
Quantity Per Car: 2
Notes: FRONT TO FRAME - 17MM BAR
Quantity Per Car: 1
Notes: FRONT - 12MM BOLTS - -1-3/4 TO +1-3/4 DEGREE - SINGLE OFFSET
Quantity Per Car: 2
Notes: FRONT - 12MM BOLTS - DOUBLE OFFSET - -1-3/4 TO +1-3/4 DEGREE - REPLACING ALL BOLTS WILL INCREASE CAMBER ADJUSTMENT RANGE TO +/- 2.5 DEG
Quantity Per Car: 2
Notes: BUSHING - FRONT LOWER FORWARD
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: CAMBER: -1.75 TO +1.75 - EZ CAM XR (12MM - PAIR) - 75200 MUST BE USED w/10408
Quantity Per Car: 1
Notes: REAR - M10 X 1.5 X 40 (8) - 75200 MUST BE USED w/10408
Quantity Per Car: 1
Notes: DISCONTINUED REAR - 4 WHEEL ALIGNMENT ASSORTMENT NYLON SHIM SET - QTY 18 CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 1/16 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 1/8 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 1/4 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 3/8 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 1/2 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 5/8 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 3/4 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 7/8 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DISCONTINUED 1 DEGREE NYLON SHIM - REAR - 4 WHEEL ALIGNMENT - CAUTION: CHECK CALIPER TO ROTOR CLEARANCE w/DISC BRAKE USE SPACER AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 1
Notes: DUAL ANGLE SHIM (BLUE) - REAR - CAMBER: -1.50 DEGREE TO + 1.50 DEGREE - 75200 MUST BE USED w/10408 - CHECK FOR CALIPER TO ROTOR CLEARANCE w/DISC BRAKES. USE SPACER PAK 75970 AS NECESSARY TO KEEP CALIPER CENTERED ON ROTOR
Quantity Per Car: 2
Notes: FRONT - 4 WHEEL ALIGNMENT - ROTARY FILE SET - PERF
Quantity Per Car: 1
Notes: FRONT
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: B16 (PSS9) - FRONT & REAR - BASE MODEL - CARAT - GL - GLI 16-VALVE
Quantity Per Car: 1
Notes: B12 (PRO-KIT) - FRONT & REAR - FRONT LOWERED HEIGHT: 20MM, UP TO 840KG AXLE LOAD - REAR LOWERED HEIGHT: 20MM, UP TO 740KG AXLE LOAD
Quantity Per Car: 1
Notes: FRONT
Quantity Per Car: 2
Notes: FRONT
Quantity Per Car: 2
Notes: END LINK - FRONT - 12MM
Quantity Per Car: 2
Notes: END LINK - FRONT - 10MM
Quantity Per Car: 2
Notes: KIT - FRONT
Quantity Per Car: 2