0
732-374-3872

CHEVROLET TRUCK BLAZER FULL SIZE 1980 U & CV Joints & Drive Shaft

Department
Part Type
  • ...Show all (87)

Manufacturer Part Number
Name
Notes: FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS - CONVENTIONAL LUBE FITTING IN BODY
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS
Quantity Per Car: 1
Notes: REAR DRIVESHAFT AT REAR AXLE - CONVENTIONAL LUBE FITTING IN BODY
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT - CV AT TRANSFER CASE
Quantity Per Car: 2
Notes: FRONT DRIVESHAFT - CV AT TRANSFER CASE
Quantity Per Car: 2
Notes: REAR DRIVESHAFT AT REAR AXLE
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT - CV AT TRANSFER CASE
Quantity Per Car: 2
Notes: REAR DRIVESHAFT AT REAR AXLE
Quantity Per Car: 1
Notes: FRONT AXLE SHAFT - RIGHT OUTER
Quantity Per Car: 2
Notes: FRONT AXLE SHAFT - RIGHT OUTER
Quantity Per Car: 2
Notes: TRANSFER CASE TO FRONT AXLE
Quantity Per Car: 1
Notes: DOUBLE CARDAN CV FLANGE
Quantity Per Car: 1
Notes: w/DOUBLE CARDAN CV WELD
Quantity Per Car: 1
Notes: w/DOUBLE CARDAN CV H
Quantity Per Car: 1
Notes: FRONT - REAR
Quantity Per Car: 1
Notes: FRONT - w/27-1/4" LONG DRIVESHAFT - MEASUREMENT IS TAKEN FROM THE CENTERLINE OF THE U-JOINT LOCATED AT THE SLIP YOKE END TO THE CENTERLINE OF THE FURTHEST U-JOINT ON THE OPPOSITE END OF THE COLLAPSED PROP SHAFT
Quantity Per Car: 1
Notes: FRONT - w/23-7/8" LONG DRIVESHAFT - MEASUREMENT IS TAKEN FROM THE CENTERLINE OF THE U-JOINT LOCATED AT THE SLIP YOKE END TO THE CENTERLINE OF THE FURTHEST U-JOINT ON THE OPPOSITE END OF THE COLLAPSED PROP SHAFT
Quantity Per Car: 1
Notes: BEARING ID 1.5748"/40MM - SPICER 1410 SERIES
Quantity Per Car: 1
Notes: INSERT CUSHION ONLY FOR #6056
Quantity Per Car: 1
Notes: BEARING ID / BORE: 1.3780" / 35MM - CENTERLINE: 2.28" / 58MM - MOUNT WIDTH: 6.62" / 168MM - SPICER: 1280-1310-1410 (SLIP YOLK STYLE)
Quantity Per Car: 1
Notes: ASSEMBLY - 55MM WIDTH - ID 35MM/1.3780" - SHAFT SPACER INCLUDED
Quantity Per Car: 1
Notes: ASSEMBLY - 2.25" CENTERLINE HEIGHT - ID 40MM/1.5748" - w/o MOUNTING BOLTS
Quantity Per Car: 1
Notes: REAR SHAFT ALL JOINTS - GRADE STANDARD - LUBRICATION TYPE GREASE FITTING IN CROSS
Quantity Per Car: 3
Notes: FRONT WHEELS ALL JOINTS - OPTIONAL FITMENT OPTIONAL VERSION AVAILABLE, 215-0299 (GREASEABLE BEARING CAP) - GRADE STANDARD - LUBRICATION TYPE SEALED UNIT
Quantity Per Car: 2
Notes: FRONT WHEELS ALL JOINTS - GRADE STANDARD - LUBRICATION TYPE GREASE FITTING IN BEARING CAP
Quantity Per Car: 2
Notes: REAR SHAFT ALL JOINTS - GRADE STANDARD - LUBRICATION TYPE GREASE FITTING IN BEARING CAP
Quantity Per Car: 3
Notes: FRONT SHAFT - GRADE STANDARD - LUBRICATION TYPE GREASE FITTING IN CROSS
Quantity Per Car: 1
Notes: FRONT SHAFT - GRADE STANDARD - LUBRICATION TYPE GREASE FITTING IN BEARING CAP
Quantity Per Car: 1
Notes: FRONT SHAFT REAR AND CENTER JOINT - OPTIONAL FITMENT OPTIONAL VERSION AVAILABLE, 219-3105 (ALUMINUM COATED) - GRADE STANDARD - LUBRICATION TYPE GREASE FITTING IN CROSS
Quantity Per Car: 2
Notes: TRANSFER CASE TO FRONT AXLE
Quantity Per Car: 2
Notes: FRONT SHAFT - REAR SHAFT REAR JOINT - HARDWARE 5/16-24 BOLTS
Quantity Per Car: 1
Notes: REAR SHAFT ALL JOINTS
Quantity Per Car: 3
Notes: FRONT SHAFT FRONT JOINT
Quantity Per Car: 1
Notes: REAR SHAFT ALL JOINTS - GRADE PERFORMANCE - LUBRICATION TYPE GREASE FITTING IN CROSS
Quantity Per Car: 3
Notes: FRONT WHEELS ALL JOINTS - GRADE PERFORMANCE - LUBRICATION TYPE SEALED UNIT
Quantity Per Car: 2
Notes: FRONT WHEELS ALL JOINTS - GRADE PERFORMANCE - LUBRICATION TYPE GREASE FITTING IN BEARING CAP
Quantity Per Car: 2
Notes: FRONT SHAFT - GRADE PERFORMANCE - LUBRICATION TYPE GREASE FITTING IN CROSS
Quantity Per Car: 1
Notes: FRONT SHAFT REAR AND CENTER JOINT - GRADE PERFORMANCE - LUBRICATION TYPE GREASE FITTING IN CROSS
Quantity Per Car: 2
Notes: CENTER - CUSHION FOR 646056
Quantity Per Car: 1
Notes: CENTER - CUSHION AND SUPPORT FOR 646035
Quantity Per Car: 1
Notes: CENTER - w/SPICER:1280-1310(END YOLK STYLE) 1.1811
Quantity Per Car: 1
Notes: CENTER - w/SPICER:1410-1480 1.5748" BEARING I.D. 2.4790" BEARING CENTERLINE
Quantity Per Car: 1
Notes: CENTER - w/SPICER 1810 2.3622
Quantity Per Car: 1
Notes: CENTER - w/SPICER:1410-1480 1.5748" BEARING I.D. 2.2500' BEARING CENTERLINE
Quantity Per Car: 1
Notes: CENTER - w/SPICER:1280-1310-1410(SLIP YOLK STYLE) 1.3780
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS - NON-GREASABLE SUPER STRENGTH
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS - GREASABLE SUPER STRENGTH
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS - PREMIUM - CONVENTIONAL LUBE FITTING IN BODY
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT - CV AT TRANSFER CASE - NON-GREASABLE SUPER STRENGTH
Quantity Per Car: 2
Notes: FRONT DRIVESHAFT - CV AT TRANSFER CASE - GREASABLE SUPER STRENGTH
Quantity Per Car: 2
Notes: REAR DRIVESHAFT AT REAR AXLE - NON-GREASABLE SUPER STRENGTH
Quantity Per Car: 1
Notes: REAR DRIVESHAFT AT REAR AXLE - GREASABLE SUPER STRENGTH
Quantity Per Car: 1
Notes: REAR DRIVESHAFT AT REAR AXLE - PREMIUM - CONVENTIONAL LUBE FITTING IN BODY
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT - CV AT TRANSFER CASE - PREMIUM
Quantity Per Car: 2
Notes: FRONT AXLE SHAFT - RIGHT OUTER - NON-GREASABLE SUPER STRENGTH
Quantity Per Car: 2
Notes: FRONT AXLE SHAFT - RIGHT OUTER - GREASABLE SUPER STRENGTH
Quantity Per Car: 2
Notes: FRONT - REAR
Quantity Per Car: 1
Notes: TRANSFER CASE TO FRONT AXLE
Quantity Per Car: 1
Notes: DOUBLE CARDAN CV FLANGE
Quantity Per Car: 1
Notes: w/DOUBLE CARDAN CV WELD
Quantity Per Car: 1
Notes: w/DOUBLE CARDAN CV H
Quantity Per Car: 1
Notes: SUPERSEDED FRONT AXLE AT WHEELS - LUBE FITTING IN BRG CUP - WHEEL JOINTS - SPICER - DIAGRAM LOCATION: 1 - DIAGRAM: I
Quantity Per Car: 2
Notes:
Quantity Per Car: 1
Notes: SVL FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS
Quantity Per Car: 1
Notes: SPL - FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS - GREASEABLE
Quantity Per Car: 1
Notes: SPL - NON-GREASABLE - FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS
Quantity Per Car: 1
Notes: SPICER FRONT DRIVESHAFT AT FRONT AXLE - REAR DRIVESHAFT AT TRANS
Quantity Per Car: 1
Notes: SVL REAR DRIVESHAFT AT REAR AXLE
Quantity Per Car: 1
Notes: SVL FRONT DRIVESHAFT - CV AT TRANSFER CASE
Quantity Per Car: 2
Notes: SPL - REAR DRIVESHAFT AT REAR AXLE - GREASEABLE
Quantity Per Car: 1
Notes: SPL - NON-GREASABLE - REAR DRIVESHAFT AT REAR AXLE
Quantity Per Car: 1
Notes: SPICER REAR DRIVESHAFT AT REAR AXLE
Quantity Per Car: 1
Notes: SPICER FRONT DRIVESHAFT - CV AT TRANSFER CASE
Quantity Per Car: 2
Notes: FRONT DRIVESHAFT - CV AT TRANSFER CASE - SPL
Quantity Per Car: 2
Notes: SUPERSEDED FRONT AXLE AT WHEELS - LUBE FITTING IN BRG CUP - WHEEL JOINTS - SPICER - DIAGRAM LOCATION: 1 - DIAGRAM: I
Quantity Per Car: 2
Notes: FRONT AXLE AT WHEELS
Quantity Per Car: 2
Notes: FRONT AXLE AT WHEELS - SPL
Quantity Per Car: 2
Notes: OBSOLETE FRONT DRIVESHAFT - CV AT TRANSFER CASE - CV SEAT REPAIR KIT - DIAGRAM LOCATION: CV - DIAGRAM: I
Quantity Per Car: 1
Notes: TRANSFER CASE TO FRONT AXLE
Quantity Per Car: 1
Notes: FRONT DRIVESHAFT - CV AT TRANSFER CASE - CV BALL & SEAT KIT - DIAGRAM LOCATION: CV - DIAGRAM: I
Quantity Per Car: 1
Notes: 1.57", 40MM ID - ENCASED - BEARING ONLY
Quantity Per Car: 1
Notes: 1.57", 40MM ID - M10X1.5 MOUNTING BOLTS - 1.85" WIDTH - STEEL BASE
Quantity Per Car: 1
Notes: FRONT - 27 1/2" LONG FROM CENTER OF U-JOINT CAPS - DANA 44 STANDARD ROTATION
Quantity Per Car: 1
Notes: FRONT - 23 7/8" LONG FROM CENTER OF U-JOINT CAPS - DANA 44 STANDARD ROTATION
Quantity Per Car: 1
Notes: AXLE KIT - REAR - 8.5" 10 BOLT - 28 SPLINE
Quantity Per Car: 1
Notes: AXLE KIT - FRONT - 8.5" 10 BOLT - 28 SPLINE - 4340 CHROME-MOLY - w/SUPER JOINTS
Quantity Per Car: 1
Notes: AXLE KIT - FRONT - 4340 CHROME-MOLY - w/SUPER JOINTS - DANA 44
Quantity Per Car: 1
Notes: 1.5748" BEARING ID - SPICER 1410 SERIES
Quantity Per Car: 1
Notes: 2.3622" BEARING ID - SPICER 1810 SERIES
Quantity Per Car: 1
Notes: MANUAL HUB SPINDLE NUT KIT - 19 SPLINE AND 27 SPLINE - FOR LOCKING HUB - FULL TIME 4 WHL DRIVE REQS TRANSFER CASE CONVERSION KIT - REPLACING AUTOMATIC 3 HOLE CAP w/MANUAL - USE CORRECT SPINDLE NUT KIT
Quantity Per Car: 1
Notes: BEARING ID 1.5748"/40MM - SPICER 1410 SERIES
Quantity Per Car: 1
Notes: FRONT - PKG QTY: 5 - BOXED
Quantity Per Car: 1
Notes: FRONT - PKG QTY: 1 - BAGGED
Quantity Per Car: 1
Notes: PKG QTY: 2 - BOXED
Quantity Per Car: 2
Notes: PKG QTY: 1 - BAGGED
Quantity Per Car: 2
Notes: FRONT - THREAD SIZE: 3/4-20" - PKG QTY: 5 - BOXED - PKG TYPE: BOX
Quantity Per Car: 2
Notes: FRONT - THREAD SIZE: 3/4"-20 - PKG QTY: 1 - BAGGED
Quantity Per Car: 2
Notes: SELL UNTIL DEPLETED - FRONT INNER - REAR INNER - THREAD SIZE: 1-5/8-16 - PKG QTY: 1 - BAGGED
Quantity Per Car: 2
Notes: SELL UNTIL DEPLETED - FRONT OUTER - REAR OUTER - THREAD SIZE: 1-5/8-16 - PKG QTY: 2 - BOXED - PKG TYPE: BOX
Quantity Per Car: 2
Notes: FRONT - PKG QTY: 1
Quantity Per Car: 2
Notes: FRONT - PKG QTY: 1 - BAGGED
Quantity Per Car: 2
Notes: FRONT OUTER - PKG QTY: 1 - BAGGED
Quantity Per Car: 2
Notes: BEARING ID 1.5748"/40MM - SPICER 1410 SERIES
Quantity Per Car: 1
Notes: FRONT - THREAD SIZE: 3/4-20" - PKG QTY: 1 - CARDED
Quantity Per Car: 2
Notes: BOLT HOLES CENTER TO CENTER: 1.58" - PKG QTY: 1
Quantity Per Car: 4
Notes: 7/8" BEARING CAP DIA - BOLT HOLES CENTER TO CENTER: 1.79" - CONTAINS 1 STRAP AND 2 BOLTS - PKG QTY: 1
Quantity Per Car: 4
Notes: ASSORTMENT - STRAP TYPE - BOLT HOLES CENTER TO CENTER: 1.79" - CONTAINS 2 DIFFERENT STRAPS AND 4 BOLTS - PKG QTY: 2
Quantity Per Car: 4
Notes: 5/32" X 18 THREAD
Quantity Per Car: 4